RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
RO чиста вода лечение
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Електрическа мощност на търговски RO системи за пречистване на вода
За търговска пречиствателна станция за вода се нуждае от 220-380V / 50Hz / 60Hz. За по-голям капацитет, особено за индустриална система за обратна осмоза, поради помпата за високо налягане, тя се нуждае от 380V 50 / 60Hz. Що се отнася до вашия търговски дизайн на машина за филтриране на вода с обратна осмоза, ние ще проверим вашето електрическо захранване и ще решим да фиксираме захранването ви. Също така, имаме някои методи за пестене на енергия, за да намалим разходите за електроенергия, новите технологии за пречистване на водата Chunke ви помагат да намалите най-големите си разходи за работеща система.
Преди да закупите търговска система за пречистване на вода, трябва да знаете:
1. Капацитет за производство на чиста вода (L / ден, L / час, GPD).
2. TDS за захранваща вода и доклад за анализ на суровата вода (предотвратяване на проблема със замърсяването и мащабирането)
3. Желязото и манганът трябва да бъдат отстранени, преди суровата вода да влезе в мембраната за филтриране на водата с обратна осмоза
4. TSS (Общо суспендирани твърди) трябва да се отстрани преди мембраната на търговската система за пречистване на водата.
5. SDI (индекс на плътност на тинята) трябва да бъде по-малък от 3
6. Трябва да сте сигурни, че вашият водоизточник няма масло и грес
7. Хлорът трябва да бъде отстранен преди търговската система за пречистване на водата
8. Налична електрическа мощност напрежение и фаза
9. Оформление на място за търговска система за обратна осмозаРаботна спецификация за търговски системи за пречистване на вода RO
Захранваща вода TDS: 0 - 1000ppm
|
Твърдост над 18ppm Нуждае се от дозиране на антискалант
|
Мътността трябва да бъде
Отстранени
|
Макс. Температура на захранващата вода: 42 ° C
|
Работете при по-високи резултати от TDS По-ниски
Възстановяване
|
H2S трябва да бъде
Отстранени
|
Толеранс на рН: 3-11
|
Макс. съдържание на желязо: 0.05ppm
|
|
Налягане на захранващата вода: 1,5 до 6 бара
|
Макс. силициев толеранс толеранс: 60ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.